TEF1118P-16-150W / Switch / 16 10/100Mbps +1 Gigabit/SFP Slots Switch With 16-Port PoE
TEF1118P-16-150W is a Tenda PoE switch that offers 16 10/100 Mbps Base-TX RJ45 ports, 1 10/100/1000 Mbps Base-T RJ45 ports, and 1 1000 Mbps Base-X SFP port. Ports 1-16 comply with the IEEE 802.3af standard (maximum PoE power output: 15.4 W) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 135 W and can supply power to and exchange data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, and Extend to help reduce cabling costs of IP terminals like APs and IP cameras.

Standard&ProtocolIEEE 802.3 IEEE 802.3uIEEE 802.3xIEEE 802.3af
MTBF100,000hours
Indicator16*Link/Act per device
1*G1 Link/Act per device
1*SFP Link/Act per device
1*PoE-MAX per device
1*Power per device
Interface16 10/100Base-TX ports(Data/Power)
1 10/100/1000Base-T port(Data)
1 1000Base-X SFP port
Lightning Protection6KV
Store & ForwardYes
exchange capacity7.2 Gbit/s
Packet Forwarding Rate5.36Mpps
MAC Address Table4K
PoE supply managementPort 1 to Port 16 support IEEE802.3at/af POE standard
PN pass-through1 2 4 5 +3 6 7 8 –
Input PowerAC100-240V 50/60Hz
Dimension294*178*44mm( W x D x H )
Power Consumptionin full configuration 150W
PoE Max Power Supply135W
Ports featureCCTV: 1-8 ports based CoS, If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device to which the monitoring computer connects. This ensures smoother monitoring video playback.
Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
VLAN: In this mode,1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.