<span;>Hardware
<span;>Chipset : MTK7628
<span;>Flash : Default 4MB SPI Nor Flash
<span;>SDRAM : Default 32MB SDRAM
<span;>Interface : 2 *100BaseTX (Auto MDI/MDIX) LAN Port (Passive PoE Supported)
<span;>Power Supply : 24V DC /0.5A (PoE)
<span;>Button : 1 *Reset Button
<span;>Antenna : 2 *12dBi internal antennas
<span;>LED Indicators : 1 *Power, 1 *LAN, 1 *LAN2,,2 *Signal Strength
<span;>Environment :
<span;>- Operating Temperature: 0?~40? (32?~104?)
<span;>- Storage Temperature: -40~70? (-104?~158?)
<span;>- Operating Humidity: 10%~90% non-condensing
<span;>- Storage Humidity: 5%~95% non-condensing

<span;>Wireless
<span;>Standards : IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3u, IEEE 802.3
<span;>RF Frequency : 2.4~2.4835GHz
<span;>Data Rate :
<span;>- 802.11n: up to 300Mbps
<span;>- 802.11g: up to 54Mbps (dynamic)
<span;>- 802.11b: up to 11Mbps (dynamic)
<span;>Wireless Security :
<span;>- 64/128-bit WEP, WPA/WPA2, WPA-Mixed
<span;>Channels : 1-11 (North America), 1-13 (General Europe), 1-14 (Japan)
<span;>Modulation Type : DBPSK, DQPSK, CCK and OFDM (BPSK,QPSK,16-QAM/ 64-QAM)
<span;>Reception Sensitivity :
<span;>- 11M: -81 dBm@10% PER
<span;>- 54M: -68 dBm@10% PER
<span;>HT20 MCS7: -65 dBm@10% PER
<span;>HT40 MCS7: -62 dBm@10% PER

<span;>Software
<span;>System Status : A summary of wireless status
<span;>Operation Mode :
<span;>- AP Mode
<span;>- Repeater Mode
<span;>- Client
<span;>- Bridge
<span;>- AP+ Client
<span;>- Bridge+Client

<span;>Network :
<span;>- LAN Setting
<span;>- Static DHCP Setup

<span;>Wireless :
<span;>- Basic Setting
<span;>- Advanced Setting
<span;>- Basic Setting
<span;>- Advanced Setting
<span;>- Country Region
<span;>- Band
<span;>- Channel
<span;>- DFS
<span;>- TX/RX Chain
<span;>- Distance
<span;>- RF output power

<span;>Management :
<span;>- Basic Setting
<span;>- Upgrade Firmware
<span;>- Save/ Reload Setting
<span;>- Time Zone Setting
<span;>- Password Setting
<span;>- System Log
<span;>- logout